Siemens Simatic ET200SP Digital Output module 6ES7132-6BF01-0BA0

 6ES7132-6BF01-0BA0 Digital Output module, Siemens Simatic et 200sp DQ8x24v dc/0,5a standard, source output PNP-switching. Siemens SIMATIC ET 200SP 6ES7132-6BF01-0BA0 is a digital output module, DQ 8x  DC 24Volt or 0,5 A Standard, output method PNP, P-switching, substitute output value. Siemens I/O module ready stock at our warehouse. Many models of Digital, Analog PLC extensions you will get from us.

Siemens Digital Output module specification:

Supply voltage

• Rated value: 24 Volt DC
  
• permissible range: lower limit is 19.2 Volt DC
  
• permissible range: the upper limit is 28.8 Volt DC
  
• Reverse polarity protection: Yes

Input current

• Current consumption: max. 35 mA; without load

Output voltage

• Rated value: 24 Volt DC

6ES7132-6BF01-0BA0 Digital Output module Digital outputs

• Digital output Source: PNP
  
• Digital outputs: 8
  
• Current sourcing: Yes
  
• Digital outputs: Yes (parameter type)
  
• Short Circuit protection: Yes
  
• Limitation of inductive shutdown voltage: (L+) -50 Volt
  
• Controlling a digital input: Yes
  
• Outputs switching capacity: Yes
  
• Resistive load: maximum 0.5 A
  
• Lamp load: maximum 5 W

Load resistance range

• lower limit: 48 Ω
• upper limit: 12 kΩ

Output voltage

• Signal: “1” min. L+ (-0.8 Volt)

Output current

• Signal “1” rated value: 0.5 A
• Signal “1” permissible range: maximum 0.5 A
• Signal “0” residual current: maximum 0.1 mA

Switching frequency

• Resistive load: maximum 100 Hz
• Inductive load: maximum 2 Hz
• Lamp load: maximum 10 Hz